The following are the complete guides on how to flash Mediatek phone using SP flash tool. Use this method to flash Vodafone, Tecno, HTC, Meizu, Huawei, Pluzz, and ZTE phones. How to flash android mediatek stock rom. Follow this guide 1. Launch Smartphone Flash Tool. Click on Scatter loading file 2. Navigate to the location of the Scatter file, highlight it then click Open 3. Click on download button 4. Turn off your mobile phone, remove the battery, reinsert the battery, connect your phone to your computer via USB cable. 5. Once you see, the download OK message in splash flash tool, disconnect your phone from the computer. Remove, reinsert the battery and power on your device During the flashing process, the phone may reboot once or twice. Do not interrupt the flashing process as it could result in a dead phone Important Notice Your Phone must be at last 50% charged Disable driver signature enforcement on your computer Install Mediatek USB VCOM Drivers depending on your operating system bit installed on your computer Use Feature phone boot key or Smartphone Boot key Know your phone mobile CPU Backup your Phone firmware before flashing (if there is a necessity)